Manea Manual 8

This sub menu is used to inhibit sales of certain products during particular time periods

It allows the user to select the language of operation of the machine.

To select use the numerical keyboard to the number corresponding to the required language

Access this sub-menu to modify the password for access to programming, use a 5 digit password and make sure you store the number safely (use with caution).

The submenu for setting the temperatures is accessible from the SETTINGS MENU and all the key settings and alarms can be set from this sub-menu

There are 5 values that can be set from this menu

When the inside temperature reaches this temperature,

T all = This temperature setting, when reached, will put the machine

Out of Service. The Error Code 21 will show on the display.

DEmerg = Maximum Time the machine will run at Tall before

This function activates after reaching the alarm temperature.

DEcomp = Maximum time the compressor is allowed to run for after Tmin

Has been reached then Out Of Service is displayed

To program the values, move up or down the submenu. Use the numerical keys to increase or

decrease the existing value. through the arrow keys A and B. Use the ENTER key to confirm each

value. Continually pressing the ENTER key will return you to the SETTINGS MENU’.

The automatic defrost switches off the compressor and condenser fan and switches on the Hot Gas defrost solenoid. Any ice that may have built up on the evaporator is then melted and proper operation of the refrigeration unit is ensured.

The software automatically sets the duration and the frequency of the defrost operation.

For example if Tmin the lowest temperature, is set at a low temperature then the defrost

period will be longer and more frequent than if Tmin is set higher

The automatic defrost duration sets the value in minutes for the defrost cycle to last. The time starts from the opening of the hot gas valve.

The duration varies typically from two to three minutes depending on the value set for Tmin

To set this value use the numerical keyboard and confirm with the ENTER key.

Setting the parameters to ‘0’, the defrost function will not be activated

The default values are typical values they may need to be adjusted according to other factors such as ambient temperature, filling frequency, humidity

This menu manages the time at which the fluorescent tubes are switched on and off

From this submenu the basic configuration of the machine is established and the type of payment

system used. All values are entered using the front keypad.

ATTENTION. Be careful when you alter these settings as they will change

It allows you to select either Single or Multi Vend sales.

Assigning O to the selected line means only One vend is permitted with all change returned

Assigning 1 to the selected line the operation means Multi vends can be made, providing there

is sufficient credit. Change is returned by pressing the Coin Return button (ANNULA)

It inhibits the movement of the logo on the screen to save memory.

Use it when the machine is connected to an external connection, serial or modem.

To inhibit the logo or moving message enter the value '0'

Only to be used if the prices in the coin mechanism correspond with the

If activated with a 1 the Enter key must be pressed after each selection before a vend can be made

With the selection ‘0’ the fans work continuously

For a normal operation use the value ‘1’

It selects either free vend or 4 different types of payment systems and protocols

The description of the system will appear on the LCD

This can be used for free operation of the machine or to test the machine.

1 EXECUTIVE Sets the operation of the machine to Mars Executive protocol

2 Parallel Sets the operation of the coin system in parallel mode

3 PC Allows payments to be controlled by a PC based system

4 MDB Sets the operation of the machine to MDB Protocol.

To enable an Option Enter a “1” to inhibit it enter a “0”

Photo switch / Sensavend this enables or disables the vend detection system if fitted

Elevator enables or disables the lift option

Presdosati only used if the In Cup drinks module is fitted

Freezer enables or disables the refrigerator unit

60 categories Of Prices (the default number of different prices is 20) with this option

selected up to 60 different prices can be set. Note price category 00 must always be set to 00

If “SensaVend” is activated. If a selection is made and the product is not detected

the vend motor will make a complete turn; this will happen twice if needed.

If “SensaVend” does not detect any fall of product, the motor of the selection is put

Out Of Service and the customer can make another selection or press Coin Return

All the Manea MSX series can be connected with peripheral devices through which is possible

to program and to manage the machine from remote sites.

The connection can be made through serial cable or GPRS-GPS - Modems.

The cable has to be connected to the serial port of the EN0453 circuit board and to the

computer running (SUPERVISOR) management software

To use the GPRS facility a suitable modem must be installed in the machine

From this submenu it is possible to re-install the factory settings

To leave this submenu without activating it press cancel

RESTORING THE ORIGINAL SETTINGS WILL ERASE ALL USER SETTINGS and

Temperature range	Time interval In-between Defrost periods	No of defrost Periods each 24 hours	Duration Of defrost period
>10 Celsius	240 Minutes	6	3 Minutes
7-10 Celsius	130 Minutes	12	3 Minutes
3-5 Celsius	90 minutes	16	2 minutes