Machine data

Total sold

Partial sold

Partial’s reset

Statistics

Print statistics

Protected time

Price list

Link to price

 

Language

Password

Date/time

Temperature

Light schedule

Machine type

Device                                                                                                                                    

Reset to default                                                   

 

 

 

Errors

Test Motors

Motors

Coin reader

Defrost

Lift

Photo switch

Auxiliaries

 

 
7.1 MAIN MENU

This is the principal menu of the machine from which all the submenus can be accessed.

Sub menus are reached by scrolling up or down with the A & C buttons and pressing the ENTER button

 

 

·    ATT. ENTERING THE MAIN MENU will display any error messages  

·    THE LAST TEN ERRORS since the machine was last used will be shown

 

 

The Menu shows the various sub menus which can be accessed using the arrow keys,

A – For UP, C For DOWN, use ENTER to confirm the choice 

 

 

 

 This displays the serial number of the machine and can store a unique number from the operator,

 it also displays the software version.

 

 

 

It records the total number of items sold and of the operations of box since starting the machine.

 

 

 

  It recalls the chart of the interim total sold.

 

                         The chart of the interim sold increases from the last zero resetting.                   

 

 

 

The reset of the interim values allows the reset of all the interim audit data recorded since the last zero resetting.

The increase of the values will again start from the value 0.

      N.B.After reset, the data is not recoverable.

 

 

 

 

 

 

With the STATISTICS submenu, all the inventory data of the machine can be seen

in detail.

You can for instance see the Total Units Sold by Price, Total or Sold by Selection.

The sub menu can be used to view in a rapid way the detailed audit of the machine.

On the first screen you will the total of the items sold for price, continuing with the keys arrow or confirming with ENTER you will access the other screens with the data of the quantities by selection or motor.

 

 

 

 

If the print option is selected the relevant data will be printed by any printer with a serial port data

using an RS232 lead   PIN 2 Tx,  PIN 7 DTRS   PIN5Ground Transmission 9600 bauds 8bit no parity.

 

To connect the device to print or collect the data, use a serial RS232 cable and from the menu select

the Sub Menu Stamps Statistics.

It is possible to select what gives a stamp through the choice of one of the selections of the new window.

Total Print  Prints all the data memorized by the machine

Print Data Audit Prints all the audit data related to the sold items.

                                         

Audit Detailed Print of the bookkeeping data for product and selection

Technical datas print Prints all the technical data of the machine, such as configurations errors and operating times etc.

 

  

 

 Example of complete print

 

 

 

8.                                             05°

9.                                             07°

10.                                            05°

11.                                            06°

12.                                            05° NB. All recordings are related to the last 10 events

13.                                            05°    

14.                                            07°

15.                                            05°

16.                                            05°

17.                                            05°

  Recording Errors     

 

 

 

  

 

                       All the Interim Audit data and technical data are cancelled.

 

 

 

Through this sub menu up to 20 different prices can be assigned to 20 different categories.

Using the UP & DOWN keys and the ENTER key, the price  can be entered for each category.

Write down the individual prices and their respective categories.

 

To step out of the submenu press enter to confirm all the values up to the last one and press

 ENTER to return to the OPERATOR MENU’.

Or repeatedly pressing ENTER while the cursor automatically moves to exit the display.

 

 

 

In this menu the prices stored in the price list are linked to a particular motor for example.

The auto configure software will automatically detect any active motors.

A selected motor number is first entered

Then you are prompted for a category, these are the pigeon holes where the prices are stored.

Entering the category and pressing enter will link a price to a particular motor.

·         Attention. If any of the category selections is assigned the value ”0” that selection